Sevilidan Roleplay

Military Roleplay crossed with all your favorite elements


    Lorhaic Magmastone Smithing creations.

    Share
    avatar
    Trippy

    Posts : 69
    Join date : 2016-08-16

    Lorhaic Magmastone Smithing creations.

    Post by Trippy on Thu Aug 18, 2016 11:30 pm

    BATTLE AXE FOR: Tarsh!

    **Lorhaic Magmastone grabs the bucket, and tosses the ores into it, having had them cleaned by the man who mined them. He puts the top over the forge bucket, and closes it. Before sliding it into the coals, and turning to the pump, he begins to crank it. Slowly, letting it move, he continues to do this while the coals heat up, waiting for the bucket itself to turn the ores into molten metal, so that he may be able to craft them.

    **Lorhaic Magmastone stops the crank as the forge heats the bucket, the metals inside, now a smooth, red color as they have all melted, the man then takes the bucket out, and tips it into the battleaxe mold, before closing it and letting it sit. He waits for a good five or so minutes, before grabbing his hammer, and gently destroying the mold around the now dirty, and burnt battleaxe head. Grabbing it with his gloves, he tosses it into the water, watching as it hisses, and cools.

    **Lorhaic Magmastone grabbing it from the water once it has cooled. The man takes the wire brush, and begins to polish it, getting all the material off, the burnt mold, the soot, etc, etc. Once it was all off and clean. The man tosses it back into the fire, letting it warm up once again. Before taking it back out. His hands grabbing it once it was hot, placing it on the anvil. He takes the smaller hammer, and begins to beat out the wonderful design, and edge, making sure to make every area clean, and even.

    **Lorhaic Magmastone after that, he tosses it back into the forge, and cranks it up, tossing some more coals into it, and getting it nice and heated. Once done, he pulls it from the fire, and quickly quenches it in oil, to harden it, before letting it rest in the oil for a bit.

    **Lorhaic Magmastone taking it from the oil, the man then begins to clean it, and polish it, and take it to the grinder. Pressing the head to the grinder, he begins to peddle it, and work the axe along the peddle. Moving it to and from, back and forth, slowly and surely. Watching as the edge begins to form on the axe, he flips it over, and does the same to the other side, working it over nice and slow.y

    **Lorhaic Magmastone once done, the man looks his piece over, gives it a good pat, and grabs the wooden pole off the ground, and beats the axe onto it, before capping it off, and putting a rod through the wooden pole to keep it in place. He then slowly pushes the wooden pole over the fire, keeping it just above the heat, to allow the pole to harden, keeping it just out of reach so it does not catch fire.
    avatar
    Trippy

    Posts : 69
    Join date : 2016-08-16

    Re: Lorhaic Magmastone Smithing creations.

    Post by Trippy on Fri Aug 19, 2016 10:38 pm

    Sharpening for: Sindel!

    **Lorhaic Magmastone takes the halberd, and presses it against the grinding wheel, his foot presses down on the peddle, as he begins to push it over and over. Gently grinding the edge of the weapon against it. His eyes watching it over so closely. Sparks begin to fly as metal is chipped off the halberd. His hands gently pushing the edge along it back and forth, back and forth! Eventually he quickly flips it over, and begins the work on the otherside, doing the exact same thing as before, back and forth, over and over. His eyes watching it, as he begins to hum a tune. By the time it was done, the man takes it off, grabs the leather wrap against the wall, and drags the blade up and down the leather strap, on both sides, taking off any spurs, or anything that would cause the blade of the axe to stick!
    avatar
    Trippy

    Posts : 69
    Join date : 2016-08-16

    Re: Lorhaic Magmastone Smithing creations.

    Post by Trippy on Sat Aug 20, 2016 12:10 am

    Sharpening for: Rem!

    **Lorhaic Magmastone takes the double sided axe, and presses it against the grinding wheel, his foot presses down on the peddle, as he begins to push it over and over. Gently grinding the edge of the weapon against it. His eyes watching it over so closely. Sparks begin to fly as metal is chipped off the halberd. His hands gently pushing the edge along it back and forth, back and forth! Eventually he quickly flips it over, and begins the work on the otherside, doing the exact same thing as before, back and forth, over and over. His eyes watching it, as he begins to hum a tune. By the time it was done, the man takes it off, grabs the leather wrap against the wall, and drags the blade up and down the leather strap, on both sides, taking off any spurs, or anything that would cause the blade of the axe to stick!

    (Yes, yes, it was copied and reused, but you have to understand, sharpening a weapon is not much different. Then doing it any other way.)
    avatar
    Trippy

    Posts : 69
    Join date : 2016-08-16

    Re: Lorhaic Magmastone Smithing creations.

    Post by Trippy on Sun Aug 21, 2016 1:02 am

    Weapon creation for: Rem!

    **Lorhaic Magmastone takes one of the brushes, and quickly grabs the ores, taking each one by the hand, and making sure to brush each one nicely. Getting all the dirt, and other things off the ores before he places them inside the bucket! Once all of them were done, and sitting inside his forge bucket, he places the lid onto it and closes it, making sure to keep it nice and tight. Sliding it into the old coals, he grabs a bag off the ground, and empties fresh coals into it, and walks over to the crank. Turning the crank nice and slowly the man sits there, doing this for a good five or so minutes, pulling, and pulling, and pulling until the coals were as red as blood, and sending off a head hot enough to melt a mans willpower to live. Letting the bucket sit inside the coals, he waits, until the bucket itself, looks as though it is preparing to melt, before pulling out. Taking the mold he had made the night before, he pulls the top off, and uses his poker to angle it in, and watches as the molten metal seeps out, and lands int

    **Lorhaic Magmastone into the mold, the mold takes places, and makes the axe into what it is meant to be, he then breaks the mold off with his hammer, and tosses it into the water. Letting it cool for a time, the man then pulls it out, and takes a brush to it, getting all the previous mold off of it, and the soot, before tossing it back into the fire to reheat, once it was red he pulls it out. Setting it down on the anvil, he beats it into shape, and then reheats it again, before quenching it into the oil.

    **Lorhaic Magmastone After the oil, the man takes it to the grinder, and quickly begins to grind it, getting a nice even grind on it, before looking it over, and taking it to the leather belt to which he begins to run it back and forth, up and down, over and over. Once he was done, he grabs the handle he had already made, and beats the axe onto it, and quickly burns some rods into it, and caps it off. Then he grabs the handle, giving it a nice leather and silk rap, before tying it off.

    Sponsored content

    Re: Lorhaic Magmastone Smithing creations.

    Post by Sponsored content


      Current date/time is Sat Nov 18, 2017 12:49 am